Algorithm for determining the form factor of a gas laser in the advanced generation mode

Vyacheslav Belyi

Abstract


This scientific article is devoted to the determination of the form factor of a gas laser by the calculation method. The result of the work is a typical algorithm for determining the equation of the spectral line of laser radiation for the developed generation mode with the given example of solving the problem of determining the form factor of a gas laser on the example of a helium-neon laser. The algorithm given in the article can be used as the basis for methods for determining the spectral density of laser radiation by the calculation method when designing gas lasers. The article shows that for a gas laser in the advanced generation mode, when the number of photons in the resonator mode is sufficiently large, and the amplitude and phase fluctuations are independent, while the phase changes are random and have a normal distribution, the equation of the envelope of the radiation spectrum is the result of a direct Fourier transform of the two-dimensional correlation function of the signal component of radiation, the amplitude of which is determined by the total amplitude of photons in the resonator mode. Development of an effective, discrete, definite and mass algorithm for determining the explicit form of a function that is a mathematical model of the laser radiation spectrum on the example of a gas laser. Methodology: the paper used a computational method for determining the form factor of a gas laser on the example of a conventional helium-neon laser. Results: a productive, discrete, definite and mass algorithm for determining the spectral density of gas laser radiation is synthesized and an example is given that proves the efficiency of the proposed algorithm. Practical implication can be used as the basis for promising methods for determining the spectral density of laser radiation by the calculated method when designing gas lasers.


Full Text:

PDF (Russian)

References


Asryan L.V. Lasers on quantum dots with asymmetric barrier layers: threshold and power characteristics close to ideal. Quantum Electronics. vol. 49, no. 6, 2019.

Zolotoverkh I.I., Lariontsev E.G. Frequency characteristics of a gas ring laser with coupled resonators. Quantum Electronics. vol. 49, no. 8, 2019.

Astapovich M.S., Gladyshev A.V., Khudyakov M.M., Kosolapov A.F., Likhachev M.E., Buffetov I.A. A fully fiber gas Raman laser with a generation wavelength of 4.4 microns. Photon Express. no 6(158), 2019.

Avdeev A.V., Boreysho A.S., Kiselev I.A., Morozov A.V., Orlov A.E. Supersonic gas and chemical lasers: the development of technologies. Photonics. Vol. 14. no. 8, 2020.

Ionin A.A., Kinyaevsky I.O., Klimachev Yu.M., Kozlov A.Yu., Kotkov A.A. A wide-range IR laser source (2.5-17 microns) for plasma diagnostics (rEview). Nuclear Physics and Engineering. vol. 7, no. 5. 2016.

Crump P., Decker J., Winterfeld M., Fricke J., Maaßdorf A., Erbert G., Tränkle G. Development of high-power diode lasers with beam parameter product below 2 mm×mrad within the BRIDLE project. Proceedings of SPIE - The International Society for Optical Engineering. vol. 9348, 2015.

Kameyama N., Yoshida H., Fukagawa H., Yamada K., Fukuda M. Thin-film processing of polypropylene and polystyrene sheets by a continuous wave CO2 laser with the cu cooling base polymers. Polymers. vol. 13. 2021.

Khan N., Goldwasser S., Abas N., Kalair A., Haider A. Experimental investigation of unidentified helium–neon lasers. Applied Optics. vol. 56, 2017.

Khan N., Abas N., Kalair A. Multiline distributed feedback dye laser endorses Wien’s displacement law. Applied Physics B. vol. 122, 2016.

Li M., Kan R., He Y., Liu J., Chen B., Yao L., Ruan J., Xia H., Deng H., Fan X., Tao B., Cheng X. Development of a laser gas analyzer for fast CO2 and H2O flux measurements utilizing derivative absorption spectroscopy at a 100 Hz data rate. Sensors. vol. 21. 2021. 10.3390/s21103392.

Lim K-D. Choi H-K, Sohn, I-B, Lee B-H., Kim J-T. Fabrication of lensed optical fibers for biosensing probes using CO2 and femtosecond lasers applied sciences. Applied Sciences. vol. 11. 2021. 10.3390/app11093738.

Luk’yanchuk B., Zheludev N.I., Maier S.A., Halas N.J., Nordlander P., Giessen H., Chong C.T. The Fano resonance in plasmonic nanostructures and metamaterials. Nature materials. vol. 9, 2010.

Nampoothiri V., Beygi F., Debord B., Gerome F., Benabid F., Rudolph W. High photon conversion efficiency continuous wave lasing in an optically pumped I_2 hollow fiber gas laser in the visible region. Applied Optics. vol. 56, 2017. 10.1364/AO.56.009592.

Overton G., Belforte D., Nogee A., Holton C. Lasers surround us in the year of light. Laser Focus World. vol. 51. 2015.

Rejani A., Hashemzadeh M. CO2 laser-air cutting of glass-fibre-reinforced unsaturated polyester (GFRUP): an experimental investigation. The International Journal of Advanced Manufacturing Technology. 2021. 10.1007/s00170-021-07180-6.

Sierra-Hernandez J., Martin V.J., Delgado G., Martinez-Rios A., Porraz-Culebro T., Silva E., Ledesma-Carrillo L., Jauregui-Vazquez D. Switchable ytterbium fiber laser based on a symmetrical long-period fiber grating. IEEE photonics journal. 2021. 10.1109/jphot.2021.3076416.

Singh P., Das S. Generation of microstructures and extreme sub-wavelength laser-induced periodic structures on the Si surface using $$hbox {N}_{2}$$ nanosecond pulsed laser for the reduction of reflectance. Pramana. vol 95. 2021. 10.1007/s12043-020-02051-3.

Sun S., Zhang G., Shi W., Tian Z., Sheng Q., Zhang Y., Zhang H., Yao J. Optically pumped gas terahertz fiber laser based on gold-coated quartz hollow-core fiber, optically pumped gas terahertz fiber laser based on gold-coated quartz hollow-core fiber. Applied Optics. vol 58. no 11, 2019. doi:10.1364/AO.58.002828

Yao Y., Fan, Y. CO2 laser fabrication of hydrogel-based open-channel microfluidic devices. Biomedical Microdevices. vol. 23. 2021. 10.1007/s10544-021-00584-x.

Zamily R. The influence of Helium-Neon laser irradiation on wound healing International Journal of pharma and Bio Sciences. vol. 9. 2018. 10.22376/ijpbs.2018.9.2.p63-68.


Refbacks

  • There are currently no refbacks.


Abava  Кибербезопасность MoNeTec 2024

ISSN: 2307-8162